Where to look
In rough order of how little work each option takes on a Chrysler TM9 unit.
- 01
Top or side label
Slide the unit out of the centre stack. The chassis label carries a serial beginning TM9. Copy the whole string including the prefix.
- 02
Glovebox build sticker
Some North American builds repeat the audio unit serial on the vehicle build sticker in the glovebox, which saves pulling the dash apart.
We can turn it into the 4-digit unlock code
Optional — this guide stays free either way. If you would rather not chase the code down yourself, enter the serial and we return the digits straight away.
Entering the code
However you got the four digits, this is how they go in.
- 1
Ignition to accessory; the display shows CODE or ENTER CODE.
- 2
Key the four digits using preset buttons 1 to 4.
- 3
Press the SEEK-up button to confirm.
Tips from the workbench
Dodge Ram units of this era are recessed; two long-reach DIN keys or the correct Chrysler puller make removal much easier.
If the label shows no TM9 prefix, check whether it is a Jeep-format serial beginning with T instead.